3 Series E36 320i (M50) CONVER
Special case:
E34/M50 vehicles (without VANOS) may be fitted with a non-ratio control module from the
E36. In this case, fit the EPROM with part number
12 14 1 740 661.
For this special case, too, the MoDiC indicates the correct part number for the EPROM.
Note:
The EPROMs are shipped together with a red seal in a packaging box specially for
electronic components.
In the event of loss and/or damage of the seal, a new EPROM with seal must be
ordered at your expense.
Only install EPROMs which have been obtained from the BMW Parts Sales
Department!
Reimbursement:
Material and labor costs incurred can be claimed through the usual warranty channels
subject to current warranty terms as follows:
Defect code
13 61 95 14 00
This defect code is not contained in the official
defect code catalog but has been included in the
system. This will enable warranty claims to be
processed.
Reading out DME fault memory , replacing
EPROM in DME control module and programming
DME control module:
Job number
00 51 014
Labor
9 FRUs (E34/M50)
10 FRUs (E36/M50)
Warranty type
1
Warranty stage
1 (within vehicle warranty)
2 (outside vehicle warranty)
Reimbursement is limited up to March 1999.
SI Cold-start optimization E34 E36 M50 US
BMW AG - TIS
06.02.2013 19:26
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 4 -