3 Series E36 320i (M50) CONVER
Installation:
Place control unit on left and right rails and slide in inclined
upwards as far as stop.
In this position swing the control unit upwards and engage it in
spring retainers (1 and 2).
Pull plug (1) off of control unit after swinging spring retainer (2)
forward.
Caution!
Always switch ignition off before disconnecting or connecting
connector.
Code is on identification plate.
Refer to BMW Parts Catalog for cross reference of types and
models.
RA Removing and installing or replacing control unit
BMW AG - TIS
07.02.2013 00:44
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -