3 Series E36 320i (M50) CONVER
34 31 181
Replacing expansion tank for hdyraulic brake
operation from 9/96
Caution!
Note "General Data",
refer to 34 00 ...
Draw brake fluid out of the expansion tank with a suction bottle,
which may only come into contact with brake fluid.
Do not reuse drawn out brake fluid.
Loosen mounting bolt (1) and pull out completely.
Installation:
Tightening Torque,
refer to 34 31 3AZ
Disconnect expansion tank from brake master cylinder (tandem)
by tilting to side.
Plug connections on brake master cylinder for protection against
dust and dirt.
RA Replacing expansion tank for hdyraulic brake operation from 9/96
BMW AG - TIS
07.02.2013 03:01
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -