3 Series E36 320i (M50) CONVER
Fit in trunk floor plate with staightening attachment and clamp.
Weld trunk floor plate at mating surfaces.
Set welding seams with a length of approx. 20 mm at a distance
of approx. 90 mm.
Inert gas weld trunk floor plate at cross member joint.
Straighten and grind joint surfaces.
RA Replacing trunk floor (partial replacement in front of cross member) (tail panel
BMW AG - TIS
07.02.2013 04:07
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 4 -