3 Series E36 320i (M50) CONVER
Pull right cap (1) off and pull wire fold ejector (2) to left to remove.
Installation:
Route cable (1) between wire fold ejector (2) and clamping
belt (3).
Unfasten screws and remove headlining from rear of clamping
bracket.
1.
Roof liner
2.
Retaining plate (riveted to headlining)
3.
Convertible top cover
On bracket (over rear window), lift out clip (1) in center and
unfasten left/right screws (2).
Note:
Unfasten screws (2) with reversible handle and screwdriver
insert.
For the version with a metal bow (above rear window),
position (1) is also a screw, but with a washer.
RA Removing and installing / replacing headlining in convertible top (electric moto
BMW AG - TIS
07.02.2013 06:18
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 4 -