3 Series E36 320i (M50) COUPE
12 14 600
Replacing knock sensor (M50)
Interrogate fault memory of engine control unit.
Switch off ignition.
Remove complete manifold, refer to Gr. 11 00 050
Caution!
Mark plug-in connections of knock sensors on wiring harness!
Incorrect assembly of plug-in connections during assembly
can give rise to engine damage!
Plug-in connection is located below the idling speed control (idling
speed control not shown in this picture.)
Disconnect plug-in connections (1) and (2).
Release screw (1) and remove knock sensor for cylinders 1 to 3.
Note:
Knock sensor for cylinders 1 to 3 is located beneath
temperature sensors, near the ventilation spigot on the
alternator.
RA Replacing knock sensor (M50)
BMW AG - TIS
06.02.2013 22:43
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -