3 Series E36 320i (M50) COUPE
Installation:
After the installation of the exhaust system is complete, align
the exhaust bracket without tension.
Disconnect rubber rings of center suspension.
Disconnect the rear retaining bracket on left and right sides.
Take off exhaust system in downward direction.
Installation:
Check the rubber mount for damage and replace if necessary.
Preload rubber mount in forward driving direction by distance
A = 15 mm.
RA Removing and installing complete exhaust system (M50/B20, M52/B20, M52/B25, S52)
BMW AG - TIS
06.02.2013 23:40
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -