3 Series E36 320i (M52) CONVER
-
Near the steering column support
on the A-pillar side, tension the
metal panel along the whole length
of the groove (arrowed in figure) by
tapping it with a wooden wedge
-
On the outside of the cowl panel,
tension the metal panel over its
whole length by tapping it with a
wooden wedge along the groove
immediately below the windscreen.
Do not remove the windscreen for
this purpose (arrowed in figure)
-
Near the end wall, tension the
metal along the top edge over the
whole length of the metal panel by
tapping it with a wooden wedge.
Remove the ornamental grille from
the cowl panel for this purpose
(arrowed in figure)
Reimbursement:
Material and labour costs incurred can be claimed through the usual warranty channels
subject to current warranty terms as follows:
Defect code
41 00 01 39 00
Job number
41 99 000
Labour
Work time
Warranty type
1
Warranty stage
1 (within vehicle warranty)
2 (outside vehicle warranty)
The deadline for submitting claims is December 1996 .
SI Creaking bodywork E36 Convertible
BMW AG - TIS
06.02.2013 20:47
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -