3 Series E36 320i (M52) CONVER
Unfasten screws (1) and remove gasket together with rail.
Installation:
Fit angled bracket (2) and spacer disc (3).
Installation:
Insert tension belt "top" behind clamping bracket and secure
with gasket rail.
Tighten down tensioning band, cut off flush with gasket rail and
seal with soldering rod to prevent fraying (1).
Drill out rivets in window guide on C-pillar.
Installation:
The two lower rivets differ in length from the three top ones.
For rivetting, fit blind rivet adapter (repair kit, Sourcing Reference:
BMW Parts Service).
Drill out rivets in support angle.
RA Replacing convertible top fabric
BMW AG - TIS
07.02.2013 06:38
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 3 -