3 Series E36 320i (M52) CONVER
Adjust the length of the clamping bracket drive rod (4) by complete
turns until the DU bush on the clamping bracket drive rod (4) can
be installed on the convertible top linkage pin.
For this, the clamping bracket must be in its top limit position
(mechanical detent).
Fit screw with washer and tighten with lock nut.
RA Replacing linkages (both) for convertible top drive unit
BMW AG - TIS
07.02.2013 06:49
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 4 -