3 Series E36 320i (M52) CONVER
54 62 001
Removing and installing / replacing left or
right rollover protection bar (Convertible)
Caution!
Turn ignition lock to the "0" position for at least 1 minute
before starting work on the rollover bar system (risk of
injury).
Convertible top open and hardtop not fitted.
Remove headrests,
refer to 52 20 471
Remove rear seat and backrest,
refer to 52 20 000
If applicable, remove radio amplifier,
refer to 65 12 070
Caution!
The rollover bars must be triggered before disassembly
(danger of injury),
refer to 54 62 500
If applicable, remove rollover sensor,
refer to 61 35 160
Note:
If the rollover bar fails to extend, it can be triggered
mechanically.
Trigger rollover bar mechanically:
Caution!
Risk of injury
Trigger the rollover bar by inserting a punch of 4 mm diameter
through the bore.
RA Removing and installing / replacing left or right rollover protection bar (Conve
BMW AG - TIS
07.02.2013 06:55
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -