3 Series E36 320i (M52) COUPE
Remove intake air manifold.
Unfasten engine section of wiring harness and place to one side
with cable duct.
Remove fan clutch with fan impeller.
Disconnect coolant hoses at heating valve and heater.
Unfasten reservoir for power steering unit and tie up to one side.
Note:
Lines remain connected.
Remove vane pump from power steering unit.
Note:
Lines remain connected.
Fit engine to special tool 11 0 000 .
RA Removing and installing engine (M52 / S52 / M52TU / M54)
BMW AG - TIS
06.02.2013 21:56
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 3 -