3 Series E36 320i (M52) COUPE
24 00 015
Checking hydraulic pressure values (A4S
270R/ 310R)
Connect hose 24 0 021 to pressure gage 13 3 061.
Unscrew and remove plug (1) from the converter bell housing to
check the main pressure.
Important!
Inch threads.
Screw in and secure special tool 24 5 190 (adapter).
Screw pipe elbow 24 0 140 to adapter and connect with hose
24 0 021.
Start engine.
Selector lever in "P" or "N".
Engine speed > 1500 rpm.
Read main pressure on pressure gage.
Main pressure specification: 9.6 ... 10.5 bar.
RA Checking hydraulic pressure values (A4S 270R/ 310R)
BMW AG - TIS
07.02.2013 00:31
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -