3 Series E36 320i (M52) COUPE
Retraction depth (C):
Version with "two" adjusting holes behind rubbing strip:
Loosen bolts.
Raise and align door window.
Tighten the screws.
For tightening torque, refer to Technical Data 51 32 2AZ
Caution!
Checking limit stop,
refer to 51 32 ...
Note:
If the retraction depth (C) is not reached at the front, loosen
the outside mirror.
Have a second person pull the front rubber guide down and
tighten the outside mirror.
Retraction depth (C) = 1.0 ... 1.5 mm
Check gap (A) between finisher and door window.
Distance (A) = approx. 4 ... 5 mm
Remove and replace plate (1) if necessary.
Note:
The plate should fit on the other side so that larger deviations
are acceptable.
RA Adjusting left or right front door window (coupé and convertible)
BMW AG - TIS
07.02.2013 05:51
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 8 -