3 Series E36 323i (M52) CONVER
Remove housing screws.
Pull off front housing section with special tools 23 2 280 and
33 1 301 .
Caution!
Bearings or elements of the bearing brackets could be
damaged while pulling off the front case section.
Catch pin for 5th/reverse gear falls out.
Always replace bearings and segments during removal.
Remove pressure spring (1) and thrust pin (2).
Remove roller bearing (3).
Withdraw shift shaft (4).
Caution!
Needles on shift shaft.
Remove 5th/reverse gear shift arm towards top.
RA Removing and installing complete drive and output shafts (S5D 260Z / 310Z / 320Z
BMW AG - TIS
08.02.2013 03:02
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 4 -