3 Series E36 323i (M52) COUPE
Note:
Secure chain with wire to prevent it from dropping.
Unscrew timing case cover to cylinder head bolts.
Caution!
Lift timing chain and hold under tension.
Rotate engine on central screw counterclockwise to approx.
30
°
before TDC.
This prevents contact between valves and pistons.
Using special tool 11 2 250, release cylinder head bolts from
outside to inside in sequence 14 to 1.
Lift off cylinder head.
RA Removing and installing/sealing cylinder head (M52 / S52)
BMW AG - TIS
08.02.2013 02:47
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 4 -