3 Series E36 323i (M52) COUPE
Version with plate spring
Fit special tool 11 5 490 on sprocket of exhaust camshaft.
Using special tool 11 5 490 , rotate sprockets and secondary
chain clockwise, at the same time removing the VANOS
adjustment unit.
Version without plate spring
Note:
On the version without a plate spring, the VANOS adjustment unit
can be removed without a special tool.
Remove VANOS adjustment unit.
Installation:
The installation of the VANOS adjustment unit is described
separately from the removal. The assembly sequence differs
between removal and installation.
Version with plate spring
Rotate sprockets and secondary chain clockwise with special
tool 11 5 490 until detent position is reached.
RA Removing and installing or replacing VANOS adjustment unit (M52/S52)
BMW AG - TIS
08.02.2013 03:11
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 5 -
