3 Series E36 323i (M52) COUPE
Unfasten bracket for front throttle body by unfastening screws (1).
Bracket remove.
Installation note:
Check gasket (1) between mass air flow sensor and upper
section of air filter for damage and replace if necessary.
To facilitate assembly, coat gasket with acid-free grease.
Read out fault memory of ASC+T control unit, check error
messages in memory, rectify faults and cancel fault memory.
RA Removing and installing or replacing throttle body (ASC+T) (M52)
BMW AG - TIS
08.02.2013 04:08
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -
