3 Series E36 323i (M52) COUPE
24 13 156
Replacing output flange
Remove output flange, refer to 24 12 016
Caution!
Axial play must be checked and, if necessary, adjusted.
Clamp transmission extension in a vise.
Output flange must not bear.
Press output flange in direction of output.
Measure distance (A) from shoulder to sealing surface and
distance (B) from shoulder to end of output flange.
Example:
-
A = 10.0 mm
-
-B = 7.4 mm
-
==========
-
C = 2.6 mm
Measure distance (E) from sealing surface to shoulder (1) on
parking lock gear.
Press in parking lock gear for this purpose.
Example:
E = 4.0 mm
Calculate thickness of shims:
-
Distance E
-
- Distance C
-
- Axial play: (0.15 ... 0.35 mm)
-
============================
-
= Total thickness of spacer
Example of calculation:
-
E = 4.0 mm
-
-C = 2.6 mm
-
- Axial play e.g. 0.2 mm
RA Replacing output flange
BMW AG - TIS
08.02.2013 05:57
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -
