3 Series E36 323i (M52) COUPE
Rubber mount with collar:
Measure gap (A) with a feeler gauge and note value.
Rubber mount with collar:
Pull out rubber mount using special tool 00 8 550 /33 3 324 /
33 3 340 .
Rubber mount with collar:
Installation:
Installed position of rubber mount
Rubber mount with collar:
Rubber mount and trailing arm eye must be free of grease.
Draw in new rubber mount with special tool 33 3 222 /
33 3 223 /33 3 314 and M12 nut (1) to previously determined
gap (A).
RA Replacing one front trailing arm rubber mount (trailing arm removed)
BMW AG - TIS
08.02.2013 08:40
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -