3 Series E36 323i (M52) COUPE
33 33 515
Replacing two additional rubber mounts for
rear axle carrier (rubber mount at rear)
Rear axle lowered,
refer to 33 33 101
Unfasten stabilizer bar on rear axle carrier.
Both pulling arms must be applied at openings of mount on
support pipe.
Heat sleeve with a hot air blower.
Pull out rubber mounts using special tool
00 8 550/33 3 /107/321.
Installation:
Rubber mounts may only be installed in pairs of same make.
Openings (1) in longitudinal axis of vehicle (F).
Coat new mount (1) with Circolight (refer to BMW Parts Service)
and pull in with special tool 33 3 103/104/322/223.
RA Replacing two additional rubber mounts for rear axle carrier (rubber mount at re
BMW AG - TIS
08.02.2013 08:44
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -
