3 Series E36 323i (M52) COUPE
Clean engine carrier connection and drill holes.
Produce reinforcement plates with width (B) of about 60 mm and
coat with zinc dust paint.
Insert reinforcement plates half their width into engine carrier and
plug weld.
Align partial replacement piece with straightening attachment (1)
and plug weld.
Weld engine carrier in welding joint.
Grind down and clean welded seam and welded spots.
Tin out and grind joint until they are smooth.
RA Replacing right engine support (partial replacement in front of front axle) (E36
BMW AG - TIS
08.02.2013 10:29
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -