bmw Workshop Repair Guides

BMW Workshop Service and Repair Manuals

3 RA Removing And Installing_replacing Front Left Or Right Door Window (coupé, Conver|Page 2222 > < 3 RA Removing And Installing_replacing Front Left Or Right Door Window (coupé, Conver|Page 2220
Page 3
background image

Lower door window to about 190 mm.

Caution!

Disconnect power window motor plug. Refer to safety
precautions to avoid injury from clamping.

Unfasten screw (1), loosen screw (2) and remove rear bracket for
door window detent.

Tightening torque, refer to Technical Data 51 32 2AZ

Lower door window to about 110 mm.

Caution!

Disconnect power window motor plug.

Note safety instructions on risk of finger-jam,

refer to 51 32 ...

Push securing clips aside.

Caution!

Open the rotary latch lock.

Grip door window and disconnect window regulator arms. Lay
aside rear window on door.

Installation:

Guide front end of window glass into guide rail.

Unfasten screw (1), loosen screw (2) and remove bracket for front
door window detent.

Take window glass out of door.

Installation:

For tightening torque, refer to Technical Data 51 32 2AZ

Adjust door window,

refer to 51 32 605

RA  Removing and installing/replacing front left or right door window (coupé, conver

BMW AG - TIS

08.02.2013  11:45

Issue status (12/2007) Valid only until next DVD is issued

Copyright

Page  - 3 -

3 RA Removing And Installing_replacing Front Left Or Right Door Window (coupé, Conver|Page 2222 > < 3 RA Removing And Installing_replacing Front Left Or Right Door Window (coupé, Conver|Page 2220