bmw Workshop Repair Guides

BMW Workshop Service and Repair Manuals

2 RA Removing And Installing Engine And Transmission For Electric Sun Roof|Page 2424 > < 1 RA Arrangement Of Slide_tilt Sunroof|Page 2422
Page 1
background image

54 13 010

Removing and installing engine and
transmission for electric sun roof

Note:

Shut sun roof (neutral position).

Pull off relay for sun roof drive.

Shut sun roof with help of emergency operator.

If sun roof cannot be shut:

1.

Remove faulty motor/transmission

2.

Pull off relay for sun roof drive

3.

Install new motor/transmission

4.

Shut sun roof with help of emergency operator (neutral

position)

5.

Remove new motor/transmission again

6.

Turn new motor/transmission to neutral position

7.

Reinstall new motor/transmission

8.

Insert relay for sun roof drive

Unclip plate.

Remove screws (1 and 2).

Installation:

Replace screws (microencapsulated).

(1) = longer screw

Tightening torque, refer to Technical Data 54 13 1AZ

RA  Removing and installing engine and transmission for electric sun roof

BMW AG - TIS

08.02.2013  12:51

Issue status (12/2007) Valid only until next DVD is issued

Copyright

Page  - 1 -

2 RA Removing And Installing Engine And Transmission For Electric Sun Roof|Page 2424 > < 1 RA Arrangement Of Slide_tilt Sunroof|Page 2422