3 Series E36 323i (M52) COUPE
Remove soundproofing sheet.
Unscrew cover screws and remove cover.
Installation:
Make sure rubber grommets (1) and (2) are correctly seated.
Disconnect plug connections of control units.
Place wiring harness to one side.
Release screws/nuts (1) to (4).
Installation:
Observe tightening sequence of screws/nuts:
1.
Nut (4)
Tightening torque, 61 61 5AZ .
2.
Nut (1)
Tightening torque, 61 61 5AZ .
3.
Screw (2)
Tightening torque, 61 61 6AZ .
4.
Screw (3)
Tightening torque, 61 61 6AZ .
RA Removing and installing complete mounting bracket for windshield wiper system wi
BMW AG - TIS
08.02.2013 14:05
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 4 -
