3 Series E36 323ti (M52) COMP
18 12 030
Removing and installing / replacing rear
muffler (M40, M42, M43, M44, M50 B20,
M52 B20, M52 B25)
Flange connection without compression spring
Loosen the flanged joint.
Separate exhaust.
Installation:
Replace screws and nuts.
Align the flanged joint.
Note:
Sealing taper is produced by upset pipe.
Installation:
Lubricate flanged joint lightly with copper paste CRC, refer to
BMW Parts Service.
Turn flanges until maximum possible ground clearance is
provided.
Align the flanges parallel to each another.
Align the exhaust system and insert the screws.
RA Removing and installing / replacing rear muffler (M40, M42, M43, M44, M50 B20, M
BMW AG - TIS
08.02.2013 08:16
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -
