3 Series E36 323ti (M52) COMP
24 35 501
Replacing wire harness in automatic
transmission
Remove valve body, refer to 24 30 006
Pull plugs off of solenoids (1 ... 6) and pressure regulator (7).
Pull plugs (8 and 9) off of pulse senders.
Note:
Temperature sensor (10) is integrated in the wire harness and
must be inserted into holder (11).
Unscrew holder on valve body.
Take off wire harness.
RA Replacing wire harness in automatic transmission
BMW AG - TIS
08.02.2013 09:42
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -