3 Series E36 323ti (M52) COMP
Installation:
Place control unit on left and right rails and slide in inclined
upwards as far as stop.
In this position swing the control unit upwards and engage it in
spring retainers (1 and 2).
Remove screw (1).
Pull off plug (2).
Caution!
Always switch the ignition off before disconnecting or
connecting the plug.
Installation:
Tightening torque: 5 Nm.
Code is on identification plate.
Refer to BMW Parts Catalog for cross reference of types and
models.
RA Removing and installing/replacing control unit (A5S 300J)
BMW AG - TIS
08.02.2013 09:49
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -