3 Series E36 323ti (M52) COMP
Warning!
Prior to each use of the special tool 31 3 340 , it is essential
to read the associated Owner's Handbook fully!
All the safety precautions and instructions contained in the
Owner's Handbook must be strictly observed!
Failure to observe these safety precautions and instructions
increases the risk of serious physical injury, damage to your
health and damage to property and equipment!
Important!
1.
Prior to each use, check the special tools for defects,
modifications and operational reliability.
2.
Damaged/modified special tools must not be used!
3.
No changes or modifications may be made to the special
tools!
4.
These special tools are intended solely for the purpose
of tightening and relieving cylindrical and tapered
suspension springs.
5.
Keep special tools dry, clean and (down to the spindle)
free from grease.
6.
Impact screwdrivers are prohibited!
7.
Do not compress coil spring to full extent.
Clamp special tool 31 3 141 at guide (1) in vice.
Important!
Locking pins (2) must be felt and heard snapping into place.
Check seating of special tools 31 3 352 and 31 3 354
again.
Warning!
Locking pins (2) must be felt and heard snapping into place.
Keep special tools 31 3 352 and 31 3 354 completely dry
and free from grease!
RA Replacing front spring strut shock absorber on right or left
BMW AG - TIS
08.02.2013 10:37
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 3 -
