3 Series E36 323ti (M52) COMP
Weld up connecting point between side panel / B-pillar
Fit individual welding spots so close together that a continuous
seam is created.
Caution!
Locate welding spots in a way which prevents distortion
caused by heat elongation. Ensure that welded areas have
cooled sufficiently.
Danger of distortion!
Weld up connecting point between vehicle jack take-up point on
sub-frame.
Weld up connecting point between side panel / cover on side
member.
Weld up connecting point between side panel / floor assembly and
side panel / vehicle jack take-up point
RA Replacing rear left side panel (partial replacement of C-pillar or B- and C-pill
BMW AG - TIS
08.02.2013 14:08
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 9 -