bmw Workshop Repair Guides

BMW Workshop Service and Repair Manuals

71 Gaskets-seals, Loose Body Components > < 4 RA Removing And Installing Or Replacing Front Underbody Protection (engine)|Page 2242
Page 1
background image

51 49 000

 Removing and installing / replacing trim
panel for trunk lid (compact)

Note:

Trim panels are connected with swallow-tail guides (risk of
damage).

Side trim panels:

Unscrew bolt (1).

 Carefully unclip trim panel and remove ends from swallow-tail
guides.

Top trim panel:

Unclip centre / top trim panels.

Installation:

Fit together left, centre and right trim panels (swallow-tail
guide), then clip together.

Lower trim panel:

Drive pins of expanding rivet right through and remove rivets.
Unclip trim panel.

RA  Removing and installing / replacing trim panel for trunk lid (compact)

BMW AG - TIS

08.02.2013  15:18

Issue status (12/2007) Valid only until next DVD is issued

Copyright

Page  - 1 -

71 Gaskets-seals, Loose Body Components > < 4 RA Removing And Installing Or Replacing Front Underbody Protection (engine)|Page 2242