bmw Workshop Repair Guides

BMW Workshop Service and Repair Manuals

ABOUT US
1 RA Removing And Installing, Sealing Or Replacing Oil Pan ( M50 From 9 _ 92 )|Page 475 > < 1 RA Removing And Installing, Sealing Or Replacing Oil Pan ( M50 From 9 _ 92 )

3 Series E36 325i (M50) CONVER

Page 2
background image

Unclip oil lines for hydraulic steering from holder on engine carrier
and place aside.

Fit Special Tool 00 0 206 to engine mounting.

Attach Special Tool 00 0 200 to front locating eye on engine
and lift engine approx. 5 mm.

Unscrew engine mountings on bottom left and right.

Unfasten left and right transverse links on engine carrier.

Unfasten screw connection on front axle carrier and lower front
axle carrier.

This work is described in section on replacing front axle carrier,

refer to 31 11 001

Caution!

When lowering front subframe, do not remove steering box
from subframe.

RA  Removing and installing, sealing or replacing oil pan ( M50 from 9 / 92 )

BMW AG - TIS

08.02.2013  06:44

Issue status (12/2007) Valid only until next DVD is issued

Copyright

Page  - 2 -

1 RA Removing And Installing, Sealing Or Replacing Oil Pan ( M50 From 9 _ 92 )|Page 475 > < 1 RA Removing And Installing, Sealing Or Replacing Oil Pan ( M50 From 9 _ 92 )