3 Series E36 325i (M50) CONVER
11 36 010
Removing and installing or replacing VANOS
adjustment unit (M50)
Remove complete air guide for alternator.
Remove fan using special tools 11 5 030 and 11 5 040.
Caution!
Left-hand threads.
Hold belt pulley in position using special tool 11 5 030 and
unscrew union nut on water pump.
Removing fan and fan coupling from water pump and removing
together with fan shroud,
refer to 17 11 031
Installation:
Tighten fan with special tool 11 5 040.
Tightening torque,
refer to Technical Data 11 52 1AZ
Note:
40 Nm tightening torque is equal to 30 Nm on scale of torque
wrench.
Removing cylinder head cover,
refer to 11 12 000
Removing spark plugs,
refer to 12 12 011
RA Removing and installing or replacing VANOS adjustment unit (M50)
BMW AG - TIS
08.02.2013 06:56
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -