3 Series E36 325i (M50) CONVER
13 62 000
Removing and installing air-mass sensor
(M50, M50 TÜ 2.0l)
Turn and pull off multiple pin connector (1).
Unfasten hose clip and remove bellows (2).
Unscrew the screws or clamps (3 and 4).
Remove air-mass sensor with bellows.
Take off bellows if necessary.
RA Removing and installing air-mass sensor (M50, M50 TÜ 2.0l)
BMW AG - TIS
08.02.2013 07:50
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -
