3 Series E36 325i (M50) CONVER
24 00 003
Adjusting selector lever (A5S 300J)
Move selector lever (1) to "P".
Loosen nut (3).
Caution!
Always brace bolt with special tool 24 5 220 to avoid deformation of the cable.
Note:
Special tool 24 5 220 can only be fitted in position "P".
Press lever (2) forward (park position).
Press cable rod (4) in opposite direction to travel and then release again.
Tighten down cable rod (4) with nut (2) (grip with special tool 24 5 220).
Tightening torque, refer to Technical Data 25 16 2AZ.
RA Adjusting selector lever (A5S 300J)
BMW AG - TIS
08.02.2013 09:14
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -
