3 Series E36 325i (M50) CONVER
Remove complete differential case.
Caution!
Do not bend the pulse generator wheel.
Press pulse generator wheel off of differential case.
Caution!
Do not bend pulse generator wheel (3).
Installation:
Press fit pulse generator wheel using special tool 33 1 358.
Pull taper roller bearing off differential housing with special tool
33 1 300.
RA Replacing both bearings on final drive housing (Type M) - final drive removed -
BMW AG - TIS
08.02.2013 11:59
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -