3 Series E36 325i (M50) CONVER
Lower the door window to about 65 to 70 mm.
Loosen the top screw through the rear adjustment bore.
-
Rotate Torx screw clockwise.
-
Turn cap screw counter-clockwise.
Raise and align door window.
Tighten the screws.
-
Rotate Torx screw clockwise.
-
Turn cap screw counter-clockwise.
Tightening torque, refer to Technical Data 51 32 2AZ
Caution!
Checking limit stop,
refer to 51 32 ...
Parallelism (window tilt):
Raise the door window and mark along the seal at top and bottom
using a water-colour marker.
Note:
Clean the door window glass.
Close door window and loosen screw through front adjustment
bore.
-
Rotate Torx screw clockwise.
-
Turn cap screw (5 mm) counter-clockwise.
Note:
Screw is approx. 30 ... 40 mm to the left and
approx. 10 ... 20 mm above the adjustment bore.
RA Adjusting left or right front door window (coupé and convertible)
BMW AG - TIS
08.02.2013 15:22
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -