3 Series E36 325i (M50) CONVER
Allow adhesive to flash off at room temperature for 5 to 10
minutes.
Adhesive no longer produces threads when touched with fingers.
Glue convertible top lid cover around trim strip (1) along entire
length.
Pull on and align convertible top lid cover.
Apply adhesive in area of return edge (1), and on both sides of
convertible top compartment cover and on convertible top lid
cover.
Allow adhesive to flash off for 5 to 10 minutes.
Adhesive no longer produces threads when touched with fingers.
Glue convertible top lid cover.
Note:
Use a hand blow dryer to be able to pull the convertible top lid
cover more smoothly over the return edge (1).
Hold at a suitable distance - do not overheat.
Press on the convertible top lid cover in the radius areas with
special tool 00 9 321 (fishbone).
Cut off overlapping convertible top lid cover with a pair of scissors
or a knife.
Mount entire convertible top lid.
RA Replacing convertible top lid cover
BMW AG - TIS
08.02.2013 17:56
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 5 -
