3 Series E36 325is (M50) COUPE
Removing vibration damper (M50)
Arrest engine with special tool 11 2 170.
Caution!
Do not use a mandrel to hold the engine.
Unscrew vibration damper bolts and take off vibration damper.
Installation:
Align dowel pin bore in vibration damper with the dowel pin.
For tightening torque, refer to Technical Data
RA Removing vibration damper (M50)
BMW AG - TIS
08.02.2013 11:12
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -