3 Series E36 325is (M50) COUPE
Unfasten screws and lift off timing case cover.
Caution!
Check cylinder head gasket for damage; if necessary, remove
cylinder head and replace cylinder head gasket.
Installation:
Clean sealing surfaces.
Drive dowel pins into timing-case cover in such a way that
they protrude by about 2 to 3 mm.
Installation:
Secure new seals to timing case cover with a little grease.
RA Removing and installing, sealing or replacing timing case cover at bottom (M50)
BMW AG - TIS
08.02.2013 11:24
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 5 -
