3 Series E36 325is (M50) COUPE
You must adhere to the following waiting periods after installing
the camshaft and before cranking the engine back to the TDC
position.
-
Room temperature (20
°
C) 4 mins
-
10
°
C ... 20
°
C 11 mins
-
0
°
C ... 10
°
C 30 mins
Install camshafts with tips on intake and exhaust valves pointing
towards 1st cylinder.
Fit bearing cover.
Note:
The bearing covers are clearly marked and can be read from
the exhaust end:
A1 ... A7 for the exhaust end
E1 ... E7 for the intake end
Fit special tool 11 3 260 to cylinder head and screw into spark
plug threads in cylinders 1 and 4.
Tightening Torque,
refer to Technical Data 12 12 1AZ
RA Replacing camshaft (M50 VANOS)
BMW AG - TIS
08.02.2013 11:29
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 9 -
