bmw Workshop Repair Guides

BMW Workshop Service and Repair Manuals

41 Speed Governor > < 1 RA Replacing Fuel Filter
Page 1
background image

13 32 051

Replacing fuel filter (M50,S50US)

Remove suction hose between air-mass sensor and throttle body.

Disconnect fuel delivery line with special tool 13 3 010 from front
and back of filter.

Disconnect fuel hose with special tool 13 3 010. Unfasten hose
clip (2), remove fuel hose from delivery line by pulling downwards.

Catch and dispose of escaping fuel.

Unfasten screw (3), force tightening strap slightly apart and
unscrew filter in downwards direction. Drain filter and then remove
upper and lower hoses with clamps.

Installation:

Check direction of flow (arrow).

Arrow must point towards the injection valve strip.

RA  Replacing fuel filter (M50,S50US)

BMW AG - TIS

08.02.2013  12:22

Issue status (12/2007) Valid only until next DVD is issued

Copyright

Page  - 1 -

41 Speed Governor > < 1 RA Replacing Fuel Filter