3 Series E36 325is (M50) COUPE
24 34 861
Replacing pressure regulator for valve body
Remove valve body, refer to 24 30 006
Pressure regulator (7) cannot be replaced separately, since the
modulation pressure has to be adjusted.
Modulation pressure can only be adjusted by the manufacturers.
Replace pressure regulator (7) only in conjunction with valve
housing (2).
Remove solenoid valve (1 ... 6), refer to 24 34 853
Remove valve housing from valve body.
Loosen screws (3 ... 13).
Caution!
Check length of screws.
Installation:
Tightening torque, refer to Technical Data 24 34 1AZ
Take valve housing (2) with pressure regulator (7) off of valve
body.
RA Replacing pressure regulator for valve body
BMW AG - TIS
08.02.2013 14:30
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -