3 Series E36 325is (M50) COUPE
Brace input flange with special tool 23 0 020 and unfasten collar
nut.
Remove input flange with special tool 33 1 150.
The specified friction torque level is indicated for the new
bearings,
refer to Technical Data.
The friction torque of the old bearings no longer needs to be
measured.
Press out drive pinion.
Caution!
Be careful not to damage threads.
Extract front outer bearing race with special tool 33 1 350.
(1) Spreader
(2) Front bearing outer race
(3) Puller bell housing
(4) Pressure bolt
RA Replacing bearing for input bevel gear (Type M) - final drive removed -
BMW AG - TIS
08.02.2013 17:44
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 3 -