3 Series E36 325is (M50) COUPE
Remove drive shaft for electric vent window:
Remove side trim panel,
refer to 51 43 000
Lift out clips and fold down insulating mat.
Release screws and remove cover.
Installation:
Check installation position of drive shaft on drive unit for
subsequent installation.
Unscrew screw.
Remove drive shaft (1) with toggle catch (2).
Clamp drive shaft (1) firmly (protect against damage) and remove
toggle catch (2).
RA Replacing toggle catches on rear left and right vent windows
BMW AG - TIS
08.02.2013 21:11
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -