3 Series E36 325is (M50) COUPE
Unlock plug receptacle using a screwdriver.
Guide plug receptacle through the control unit and cushion shell.
Note:
If necessary, open up hole in seat cushion slightly.
Survey of Plugs and Drives:
Installation:
S1 Plug/actuator drive for seat height, front
S2 Plug/actuator drive for longitudinal adjustment
S3 Plug/actuator drive for backrest adjustment
S4 Plug/actuator drive for seat height, rear
S5 Insert plug through operating unit to switch for seat adjustment
S6 Plug to switch for lumbar support
S7 Plug, 12V seat adjustment
S8 Plug, 12V seat heating (base of seat)
S9 Plug, 12V seat heating(backrest)
K.. Black cable straps
RA Removing and installing or replacing cushion shell on left or right front seat (
BMW AG - TIS
08.02.2013 21:41
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 3 -