3 Series E36 325tds (M51) TOUR
Fit cable with holder and screw on bearing shell.
The cable must remain easily movable axially in the holder.
Turn ignition key to zero position.
Remove ignition key.
Check interlock/shiftlock function.
Press locking lever downwards and tighten down screw for cable
mounting.
Tightening torque 8 Nm.
Check interlock/shiftlock function.
RA Removing and installing selector lever with mounting block - version with interl
BMW AG - TIS
08.02.2013 22:04
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 5 -
