3 Series E36 325tds (M51) TOUR
Unlock bayonet by turning counterclockwise.
Disconnect all wires leading to steering column at plug-in
connections.
Installation note:
Bayonet must be heard to lock.
Installation sequence:
1.
Bayonet
2.
Rubber ring
3.
Joint socket
4.
Ball joint, if necessary with Teflon ring
Airbag:
Unscrew bolt to dashboard carrier.
Installation note:
1.
Nut
2.
Spacer bush (not fitted to US models)
3.
Washer
4.
Screw (US models: 2 screws M8X22 Z1)
Unfasten shear-off screws (1) (e.g. use chisel on screw taper and
unfasten screw with hammer or mill off screw taper) and remove
steering column.
RA Removing and installing complete steering column
BMW AG - TIS
08.02.2013 23:14
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -