3 Series E36 325tds (M51) TOUR
Braze connecting points in side member.
Weld up connecting points in side member.
Fit individual welding spots so close together that a continuous
seam is created.
Caution!
Locate welding spots in a way which prevents distortion
caused by heat elongation. Ensure that welded areas have
cooled sufficiently.
Danger of distortion!
Braze connecting points between side panel/tail panel.
Grind down all welding and brazing points.
Tin out and grind down connecting points in side member.
RA Replacing rear left side panel (touring)
BMW AG - TIS
09.02.2013 02:28
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 6 -