3 Series E36 328i (M52) SAL
Produce reinforcement plate with width (B) of about 60 mm and
coat with zinc dust paint.
Insert reinforcement plates half their width into engine carrier and
plug weld.
Align partial replacement piece, plug weld and weld in welding
joint.
Grind down and clean welded seam and welded spots.
Tin out joints.
Cringe protruding sheet metal in shown zone.
RA Replacing left front engine carrier (without wheel housing) (partial replacement
BMW AG - TIS
09.02.2013 22:00
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 4 -